5 Best Cordless Framing Nailer Reviews with Buying Guide

You probably have seen your grandpa, your dad holding a hammer and carrying buckets full of nails while working on a fence. Whoa, man…they really struggled a lot to put the nails into the wood!

But those terrible days are over. You can now easily do your home renovation or fence by using the best cordless framing nailer. Just hold the tip of the gun at the right place, squeeze the trigger, and pow! You’ve nailed it!

Best Cordless Framing Nailer

Well, you don’t have to worry about how you’re going to get the perfect one. Because we’re going to simplify your journey forward, so, keep going with us.

Top 3 Picks of Cordless Framing Nailer

Benefits of Having Cordless Framing Nailer?

Well, you can take a simple hammer to sink down the nails in the wood. But that takes a lot of time and effort, let alone labor! Now, you have to admit to the fact that a framing nailers is nothing less than a blessing in the sphere of carpentry, construction, framing as well as other nailing applications.

Whether it’s DIY enthusiasts or professionals, all rely on this type of heavy-duty nailer for getting their jobs done at ease. With that being said, some of the benefits are mentioned underneath.

Substitute to a Hammer

The best thing that can substitute a hammer is a framing nailer. It neither requires significant force nor takes much time during nailing pins. No matter how tough the job you face, a framing nailer will surely back you up without the need for a hammer.

More Power

You need to hit twice or more than that to drive a nail if you’re using a hammer. Now nail guns are obviously more powerful in comparison to a hammer. You need to position the nail at a perfect angle, and it’ll drive the nail with a certain amount of pressurized force.

In that way, the hammer will always get defeated by a nail gun when it comes to power. Just squeeze the trigger and get your work done with power!

Better Accuracy

While framing, accuracy, and precision are very important. Without them, the quality of your work would be a disaster. And hammer can’t give you the ultimate accuracy. That way you can easily miss the target or crook the nails.

Whereas, with a nail gun all you have to do is to place the tip of the nail at the perfect angle to put the nails. That’s all, and your work is done precisely.

Efficient

Nailing by hammer takes a hell of a time. On the other hand, a framing nail gun can shoot lots of nails in a short time. Thus, you’ll be able to complete your work without spending plenty of effort and time. 

Safe and Effective

Unlike hammers, framing nailer doesn’t require your fingers and hand to be in touch with the force. That way, the risks of injuries and accidents get reduced while working on your projects. So, they are unquestionably safe and secure to use.

So, you can easily see that the benefits of using a framing gun are immense.

Best Cordless Framing Nailer Reviews

We collected at least twenty models that running well in the market. Then we tested each one as intensely as possible. A maximum of them couldn’t last till the end of the test. Thus, we got the top 5 models that have the potency to be the best.

1. Paslode Cordless Framing Nailer ( 905600 XP)

Paslode, Cordless XP Framing Nailer, 905600, Battery and Fuel Cell Powered, No Compressor Needed

The reason behind getting a cordless framing nailer is to relish freedom and convenience during work, right? And no one can deny that. That’s why you should seriously consider the 905600 XP from Paslode.

It’s a perfect nailer that runs by using a 7V li-ion battery to give you the pleasure of continuity of pressing nails painlessly. With this nailer, you won’t have to carry a cumbersome compressor to operate it.

You can also run it on fuel cells that will provide you with15% more power. As a consequence, you’ll be able to drive nails into engineered lumber or LVL just like that.

As we mentioned, it’s a battery-run machine. By charging it once, you’ll be able to shot more than a thousand nails, which makes it the best battery framing nailer. What’s more, it is capable to hit all types of nails at ease.

Unlike others, the 905600 XP from Paslode has a stick magazine to ensure that the nails flow in perfect alignment towards the motor for reducing face jam.

Is there any tight and narrow space where you need to nail? No worries, this framing nailer is compact in size that will allow you to work in those spaces effortlessly. As it stands, it’s an all-weather framing nailer that you can operate even when the temperature is below 14°F

Plus, this marvelous piece of power tool weighs only 7.2 pounds and has an ergonomically designed handle. As a result, you’ll be able to work on your project all day long without getting constraints in your hand.

Another important aspect of Paslode is that it can handle almost all sizes of nails from 6 to 8-inches. Thus, you’ll be able to work clean at any degree or angle by using it.

Pros

  • 7V li-ion battery for extended life
  • Powerful battery offers to shots 1000 nails at one charge
  • Reduces face jam by using stick magazine
  • Compact sized to work effortlessly
  • Doesn’t give hand cramps due to being lightweight

Cons

  • Not good for 33-degree nailing

2. Metabo HPT Cordless Framing Nailer (NR1890DRS)

Metabo HPT Cordless Framing Nailer Kit, 18V, Brushless Motor, 2

Do you want the best battery powered framing nailer that is fast-paced and works rapidly? Then you have to try out the NR1890DR cordless framing nailer from Metabo HPT. It’ll be a brilliant addition to your nailing supplies.

It incorporates an Air Spring Drive mechanism where the air gets sealed in a chamber, and when you press the trigger, the locked air gets released. This system helps it to work as a pneumatic one. In this way, it’ll allow you to shot 2 nails per second at a fast rate and with low recoil.

As it stands, this drive system works by using a brushless motor to provide longer run-time along with durability. It’s a frictionless engine that will allow you to drive 3½ -inch nails into solid or any engineered lumber just like that! With this in your hand, you’re going to achieve superior performance.

Plus, NR1890DR from Metabo HPT has 3.0Ah 18V li-ion rechargeable battery by which you’ll be able to drive 400 nails at one charge. And since it doesn’t require a fuel cell, your cost of operating this nailer will get reduced by 25%.

Besides, it comes with an operational panel along with push-button knobs so that you can switch between bump and sequential mode at ease. It also has an ergonomically designed handle and a soft grip covering to deliver you comfort.

Want more? The Metabo HPT offers depth drive adjustment, a rafter hook, and dry-fire lockout. By the depth adjustment, you’ll be able to complete your work with a smooth finish. Not only that, but you’ll also be able to check the battery life by the actuation placed on the control panel.

Weighing 10 pounds, this nailer integrates a side lock trigger set on the handle to prevent unwanted firing. And as it’s a kit, you’ll get safety glasses, contractor bag, and fast charger.

Pros

  • Air Spring Drive for enhanced power
  • Brushless motor to ensure durability
  • Offers 400 nails shot per charge by the 3.0Ah li-ion battery
  • Push-button knobs to easily switch shot mode
  • Provides smooth finishing by the tool-less depth adjustment
  • Lock trigger to ensure safety

Cons

  • Slightly big in size
  • Lacks a tool-free jam system

3. DEWALT 20V MAX XR Framing Nailer (DCN692M1DEWALT 20V MAX Framing Nailer Kit, 30-Degree, Paper Collated (DCN692M1)

When it comes to a nail gun, you can’t afford to choose a flimsy one. With that being said, we bring you the DCN692M1 cordless framing nailer from DEWALT.

Since we’re talking about durability, this nailer boasts an effective brushless motor to make it long-lasting. Not only that, but its 20V lithium-ion batteries are also durable enough to give you the advantage of firing 700 nails per charge.

Along with that, it comes with dual speed settings so that you can drive various sizes of nails with the power and pace equivalent to a pneumatic nailer. Such speed is surely going to do your task quickly.

Moreover, the DCN692M1 from DEWALT is a versatile nailer that supports clipped or round head. The diversity doesn’t end here; it also supports shot at 30-34 degrees. Moreover, this nailer has a dynamic design that weighs 8 pounds, which will feel quite comfortable on your hand.

Unfortunately, the nailer gets jammed while working, which hampers the workflow. No worries, its stall release lever will reset the driver blade whenever it gets jammed so that you can start your work without much delay.

Nevertheless, there are indicator lights fixed into this cordless framing nailers to notify you when the charge of the batteries gets low. In that way, you won’t have to check the battery again and again.

Furthermore, with this kit, you’ll get a fast charger and a pack of 20V li-ion batteries so that you can begin your work instantly.

Pros

  • Durable owing to the brushless motor
  • Time-efficient by allowing 700 nails per charge
  • Supports 30-34 degree shot to offer versatility
  • Quickly fix the jam by the stall release lever
  • Indicator light for giving notice of battery life

Cons

  • Not suitable to work on very hardwood

4. Bostitch Cordless Framing Nailer (BCF30PTBBOSTITCH 20V MAX Cordless Framing Nailer 30 Degree Paper Tape, Tool Only (BCF30PTB)

Do you know that you lost 20 minutes extra by working with pneumatic nail guns? Now that may seem little, but in our busy life, every minute counts. But you can save your precious time if you use the BCF30P1 framing nailers from Bostitch.

It’s a fully battery-powered nail gun that runs on an insane brushless motor. With this gun, you can kick out all that compressor, cord and do your framing job at ease.

Not only that, but it’s also a dual-speed engine that is powerful enough to drive nails of length 3½-inch long. You therefore, can sink the nails into any LVL lumber within a snap!

One of the sole purposes of using a nailer is precision and quickness. That’s why BCF30P1 from Bostitch comes with a tool-less selector knob. Thus, you can easily switch between bump and sequential mode for nailing as fast and precisely as possible.

Aside from that, it has all the latest functionalities such as rafter hook, rear loading magazine, dry fire lockout, and tool-less depth adjustment system. These amazing features make it the cordless framing so far.

Besides, the BCF30P1 is equipped with a no-mar pad on its handle to make it more comfortable for you.

And in case you face any sort of jam in this tool while working, its stall release lever will readjust the driver blade to let you work again. Besides, the height of this nailer is 13.37-inch making it suitable to work in tight and confined corners.

Moreover, you’ll be glad to know that it’s a full package that includes 20V li-ion battery, a charger, and an attractive carrying bag.

Pros

  • Battery-powered for time-efficiency
  • Gives power by the dual-speed engine
  • Tool-less selector for switching the firing mode
  • Provides comfortable grip by the no-mar pad
  • Convenient height for working in the complex area

Cons

  • Reportedly get jammed pretty often

5. Dewalt Cordless Framing Nailer (DCN692B)DEWALT 20V MAX XR Framing Nailer, Dual Speed, Tool Only (DCN692B)

Hey DIY folks, this DCN692B framing nailer from DEWALT is going to win your heart. Whether you’re framing or renovating, it’s going to back you up in all your projects with all the convenience you can ask for.

This nailer is equipped with a powerful engine that consists of a brushless motor. This gives the power to thrust nails from 2 to 3-1/2 inches flush into any kind of woods. It supports 33 magazines that have the paper collated nails holding a capacity of 55.

Plus, it’s a completely battery-powered framing nailer that requires only 20V max li-ion batteries. No more compressor or anything, just hold it and get to your work.

The most amazing feature that makes it the best cordless electric framing nailer is its two different firing speeds. One will increase the numbers of nails you want to fire by expending less charge. And another will fire nails more forcefully by utilizing more battery.

In addition to firing speeds, the DCN692B from DEWALT 20v max also has two firing modes. You can either choose sequential to fire nails accurately or contact firing to boost up your work. Now that’s what’s called flexibility, right?

Moreover, its depth adjustment dial will help you adjust the nailer to flush the nail with the wood perfectly. As well, a trigger lock mechanism is incorporated in it so that you can stay safe from accidental firing.

Pros

  • Brushless motor engine to give optimum power
  • Ease of use due to being powered by 20V Max batteries
  • Two firing speed to work conveniently
  • Offers flexibility by the two-firing mode
  • Provides safety by the trigger lock

Cons

  • Doesn’t work with grip-rite nails

Things to Consider Before Buying Cordless Framing Nailer

Yes, we understand that you might get confused by going through our best cordless framing nailer. But you can get rid of all your confusion, if you go through the points we’re going to describe below.

These are the most important features that you should check out while buying one for you. We believe that once you read it, you’ll be able to get an excellent framing nailer for your framing work.

Weight

Look at the weight of your framing nailers going to be one of the most important and crucial factors during your home renovation and construction work. And you don’t need to be a rocket scientist to realize the reason behind it. You’ll need to carry it with you most of the time, even for a day.

Framing jobs more or less will require you to work overhead work thereby, you’ll have to hold your nailer above you. Now, if the nailer weighs too much, then you won’t be able to work for longer, which will hamper your productivity.

Nowadays, with the advancement of technology, manufacturers are using magnesium for making framing nailers. The best part of this metal is that it is lightweight as well as very tough.

Therefore, check out which kind of materials is used for making the nailer you’re about to buy. If it is made of strong and lightweight metal, alike magnesium, then you’re good to make the purchase.

Size

Many mixes up the issue of size with weight. But the interesting fact is you’ll notice that there are a couple of things that are big in size but lightweight. You can take foam, for example, which can be enormous but very lightweight.

Now you may ask, does the size of the framing nailer really matter? The answer is YES! Its size will help you to figure out where you can use it. You can work in the tightest and most complex spaces by using a compact-sized framing nailer. On the contrary, with a big one, you’ll face a lot of trouble working in those areas.

So, depending on your working area and project, you’ve to make the choice whether you need a small-sized or not!

Angle

This another essential trait that you must be looking for before buying a cordless framing nailers. You’ll need to put the nails in different angles depending on your projects, such as home structures, fencing or home walls, etc. At that time, the angle of nails determines the toughness of the joint of frames.

Now if you’re planning to use the nailer for occasional use, it is advisable to go for the 21-degree nailers. Whereas, for other purposes, you can switch to 28 or 33-degree nailers.

Nail Type

With the nail angles comes the nail type. There are different sizes of nail you’ll found ranging from 2 to 3 ½-inches. Learn more about nail sizes!

Besides, you also need to remember that there are two types of framing nails — one is a round head, and another is a clipped head. One framing nailer can only fire one type of nail.

You have to choose your framing nailer by following the building codes of the area you’re going to work in because some building codes allow clipped head nails, whereas some allow round head nails.

The advantage of clipped head nails is that you can fit more nails into the magazine at once. As a result, you’ll be able to fire more nails without reloading frequently.

Magazine

Without a sufficient supply of nail, you won’t be able to push thousands of nails within a few minutes. And to be honest, reloading frequently during work is very annoying. That’s why you need to search for coil magazines, as it can hold more nails than the stick magazines.

Handle

To get the best out of your framing nailer, you need to use it properly. And that can’t be possible without a comfortable handle.

Different people have different handgrip, so it’s obvious that you have to hold the nailer to ensure the comfort level before buying. And if your nailer doesn’t fit your hand, then it may bounce back, which can cause an unwanted accident.

Read more:Best Cordless Brad Nailer _ You Can Buy

Frequently Asked Questions

1. How much psi do I need for a framing nailer?

Most of the framing nailers operate within 70 to 120 psi. In order to get maximum performance, the best psi is between 100 to 120. As framing nailers generally use a nail of 2 to 3.5 inches, the easiest way to remember the larger the nail, the higher the psi is needed.

2. Is a heavy cordless nailer better than a light one?

During framing, times will come where you’ll have to work overhead. If you’re using a heavy cordless nailer, then it’s going to create a strain on your arms. That’s why it’s always better to use a light one.

3. Will a pancake air compressor run a framing nailer?

Yes, you can run a framing nailers by using a pancake air compressor. However, you’ll have to give the compressor time to fill it back; thereby you have to stop often during work. Now, if it’s about shooting 6 or 7 nails, then you won’t need to do it.

4. What is the best battery powered finish nailer?

There a handful of great battery powered finish nailers. But the model that is considered to be the best considering all the features is the Paslode 902400 Cordless Finish Nailer.

Final Verdict

That’s all the information we could get for you and we think that’s enough. Now you can take some time if needed read once more and get yourself the best cordless framing nailer.

Paslode 905600 and DEWALT DCN692M1 had a pretty tough competition. But overall, the Paslode 905600 ranks the top in regards to shooting more nails per charge, and most importantly its working power in all weather.

Leave a Comment